We believe Bore-Pro to be the best gun protection treatment available today and you will too! This product is not just an excellent cleaner, it is an easy to use, one step cleaner / treatment  Just apply it to the bore with a cotton swab.  Bore-Pro quickly removes copper, lead, plastic and "molly" fouling. The treatment is fast, long lasting and very effective. 

• Easy to Use - Long lasting Treatment

• Low Cost - Extremely Economical

• Quickly Removes Copper, Lead, Plastic, or Molly fouling

• Provides Corrosion And Wear Resistance

• Increases Barrel Life

• Harmless To Firearm Parts

• More Consistent Chamber Pressure Improves Accuracy

• Will protect all metal parts of firearm Against Corrosion and Wear

• Many Other Great Uses ( Resizing Lube, Tool Protection and More)

• 100% Money Back Guarantee (not including shipping costs)

       
               Here are some of the most commonly asked questions     

Q - How is Bore - Pro different from other cleaners available today?

A- Bore - Pro is a complete long lasting treatment. In one easy step, it provides a bright clean bore and quickly removes lead, copper, plastic or "molly" fouling, leaving a surface sealed, at the microscopic level, against further fouling, corrosion and wear.

Q -Can Bore - Pro harm my guns?

A- No, with the exception of fine wood finishes, Bore - Pro is completely harmless to all materials found in most firearms. Unlike harsh cleaners Bore - Pro does not dissolve fouling, it breaks the bonds that holds those materials into the microscopic surfaces of the gun's bore.

Q - Is Bore - Pro difficult to use?

A -No, it is almost impossible to make a mistake in using this product. The cleaning and surface conditioning action begins immediately as Bore - Pro comes into contact with any metal on the firearm being treated, no matter how it is applied.

Q - Do I need to thoroughly clean my barrel before using Bore-Pro?

A - No, Bore-Pro is a complete cleaner and treatment combination. If your bore is heavily fouled, you can use a brush to speed the cleaning action before the first and (in extreme cases) second application. For most firearms, a brush is rarely needed after the initial treatment.

Q - How often should I use Bore - Pro ?

A - Bullet type and velocity are the greatest factors in determining frequency of use. If you are shooting very soft lead bullets or jacketed bullets at velocities over 3500 f.p.s. Bore-Pro should be used more often. For example, a .22, (rim fire) fired over 500 rounds with no visible fouling left in the bore after the test. On the other end of the scale is a wild cat caliber, sometimes known as a "squirt gun". Our test gun was a Thompson Contender with a 14" barrel built by master gunsmith David Van Horn in Phoenix AZ. A "squirt gun" barrel has a .17caliber bore, but is chambered for a .22 long rifle cartridge. When fired, the bullet is forced through the bore at very high velocity by the extreme pressures resulting from this design. As you can imagine, fouling was a severe problem. After trying several of the top cleaners, we found that Bore-Pro was the only product that allowed more than a few rounds to be fired before a thorough cleaning was necessary.

Q - How does Bore - Pro increase accuracy?

A - Bore-Pro conditions the bore, providing a very smooth, uniform and low friction surface to guide the bullet as it travels down the barrel. This minimizes shot to shot velocity variation and increases accuracy.

Q - Does Bore - Pro protect parts of the gun other than the barrel?

A - Yes. The carrier used in Bore-Pro can spread the wear and corrosion resisting ingredients through the trigger group, bolt and other parts of the operating system. Also, you can wipe Bore-Pro on the external metal parts, for added rust protection.

Q - Does Bore - Pro have any other uses?

A - Yes. It can be used as a resizing lube (single stage operations only) providing excellent service life for even the most difficult to resize brass. Also, you can use it on all types of precision metal tools and equipment for excellent  wear and corrosion protection.

Bore-Pro is currently offered in single 3.5 oz. bottles and cases of 25. Bulk quantities are also available by special request.       Single Bottles _  $14.95 U.S. + $ 5.00 S&H (to continental US.)     Case (25 bottles) _  $150 U.S. +  S&H (contact us for shipping cost)     We accept all major credit and debit cards through PayPal. You can sign up for a free account, if you don't have one. It's fast, easy and one of the most secure ways to do business on the internet.    The "Buy Now" links below will take you to the secure PayPal website, where you can log in to your existing account or sign up for a new one.       Shotgun, Pistol or Rifle, Protect that expensive firearm with Bore-Pro, the finest product of its type available today!                                            Buy a Bottle Now !